IV Command – Print Clear Veneer Description This command serves either to print the entire ad- dressable image buffer or to reverse print with the clear veneer or any image data line, rectangles, graphics, text, etc. Page 27 ribbons have resin black followed by varnish pan- els, both limited to monochrome data. Warranty Information 12 months from the date of purchase by the end user. Page 26 Color Data Color data always enters a color image buffer, ei- ther as yellow, magenta, cyan, or in the case of a Considerations KsO ribbon, dye sublimation black. Page 11 means dye-sublimation black also has a five-bit- per-dot range 32 levels of gray. Compressed Bit-Map Data-to Card Figure shows a card consistent with the orienta- tion of a card traveling right to left in the card path of Mapping a printer. When the encoder receives a command, it performs the requested action and reports the re- sult.
|Date Added:||9 July 2007|
|File Size:||54.18 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Print Head Unlock Lever 3. Successful eltron p310c results in adjustment of all sensors and voltages, confirmed by no errors indicated. An eight digit is a check digit that is automatically generated by the printer.
ZEBRA ELTRON P PROGRAMMER’S MANUAL Pdf Download.
eltron p310c Other than the recommended cleaning proce- dures described in eltron p310c manual, allow only Zebra authorized technicians to service sltron P Printer NEVER loosen, tighten, adjust, or bend, etc.
These printers produce cards ideal for personalized identification, access control, eltron p310c, membership, promotion and luggage card, badges and tags. On second side, print just last K panel No lamina- tion: C abcoffice Accessories available for P Printers appear below.
Defines the height, width and eeltron of the graphic. After print completion, the card may be ejected to the output tray hopper or repositioned to print an- other image ribbon panel. Page For Clear and White Card printing: Black Eltorn Panel from the Color Ribbon. Also See eltroon P Programmer’s manual – pages. Note that this command requires the prior installa- tion of a 5-panel ribbon and works best with mil cards.
Ribbons Five imaging ribbons eltron p310c offered: Page 17 Card Thickness: Standard 2 of 5 The Two of Five code symbology encodes all infor- mation in the width of the bars. Eltron p310c – 60mil 1.
When using eltron p310c, the byte count must be rounded up Page 23 Figure shows how eltron p310c bit-map relates to associ- ated non-compressed data. Got it, continue to print. Sa Command – Self Adjust!
An eleventh digit, at the be- ginning, indicates eltron p310c type of product and a twelfth digit is a module check digit. See Chapter 2 for location. Port Signals P3xx and P4xx printers have an optional serial port.
Zebra Eltron P300 Programmer’s Manual
Remove Cleaning Roller from Cartridge and discard. If issued at Power-On, this command eltron p310c a clear media path for subsequent operations.
See Appendix A for Character Map. Moves and exits a single card from any position except the Input Hopper to the output tray. Conventions In this manual, the following conventions apply: Eltron p310c ensure print quality, the cleaning roller requires periodic replacements.
To avoid deposits, eltron p310c use foam-tipped swabs. The Printer needs cleaning. For other card thickness, start lever at lowest position and move up until cards feed. Figure shows how a bit-map relates to associ- ated non-compressed data.
eltron p310c Note that for user safety, a card-flip requires a closed cover. For P and P, moves and exits a single card from any position except the Feeder to the Output Tray. Don’t show me this message again. Don’t have an account?
IS Command – Print Color Eltrno Description This command serves to print from a selected color eltron p310c sublimation ribbon panel using data from an associated image buffer.